Panasonic 14.4V/18V Cordless Hammer Drill & Driver (EY79A2X57)

$262.00
SKU
EY79A2X57

Panasonic 14.4V/18V Cordless Hammer Drill & Driver (EY79A2X57)

14.4V/18V Cordless Hammer Drill & Driver

High power drilling with extreme durability in masonry wood and metal. Featuring a new brushless motor, possible to use with dual voltage, 13mm heavy duty keyless chuck and a hybrid switch. *Battery pack and battery charger are not included. 

Panasonic 14.4V/18V Cordless Hammer Drill & Driver (EY79A2X57)

 14.4V/18V Cordless Hammer Drill & Driver

High power drilling with extreme durability in masonry wood and metal. Featuring a new brushless motor, possible to use with dual voltage, 13mm heavy duty keyless chuck and a hybrid switch. *Battery pack and battery charger are not included. 

 

Features

14.4V/18V Cordless Hammer Drill & Driver

The Panasonic EY79A2X57 14.4V/18V Dual Voltage Cordless Drill & Driver is lightweight and compact, yet powerful. With precision variable speed control/reversible, an 18-stage clutch, optimum rotation speed control plus high power brushless motor. The EY79A2X57 is ready for work with a Panasonic 14.4V or 18V battery. Featuring a handy LED light for user-friendly operation in dark areas, a heavy-duty keyless chuck, and an electric brake for added safety.

 

Extreme Durability

New Brushless Motor 

Without brushes and commutator which can reduce the lifetime of the tool, the motor lasts approximately twice compared with brushed motor*. 

* Compared with Panasonic conventional brushed motor.

New Ultra Hard Chuck Jaw Tips 

We increased durability of every part right down to the new metal chuck which features tungsten carbide jaw tips. These extra hardened inserts are brazed into each jaw to give extra ‘bite strength’ and substantially reduce wear.

New Hybrid Switch 

To eliminate heavy friction to internal parts of the switch during use of electric brake, we developed a new semi-electronic switch. This gives smoother operation and double* the life expectancy of the part. 

* Compared with Panasonic conventional switches.

 

Powerful to the Finish

The new, large diameter brushless motors generate high power and efficiency (32Nm of torque - 18V battery). Plus the newly designed control circuit increases stable current flow to motor by more than 70%*. This enables high power output to be evenly maintained until the task is completed even during high-load operation.

* Compared with previous brushless motor.

 

Increased Efficiency and Flexibility

The new ‘Speed Control Function’ allows the user to select from three different low rotation speed settings, based on allowable maximum speeds for metal hole saws. It greatly reduces ‘run out’ when using metal hole saws and prevents surface scorching on stainless steel and other materials.

The advanced ‘Smooth Start’ electronics allow easy, precise speed control, enabling the ultimate control when starting drilling or working with small screws in precise applications.

Feature • Optimum rotation speed control
• Variable speed control / reversible
• LED light to support work
• Electric brake
• With 2 battery packs, battery charger (EY0L82) and carrying case
Max. Torque Stalling Torque High/Hard Mode 14.4V : 10Nm / 18V : 12Nm
Low/Soft Mode 14.4V : 28Nm / 18V : 32Nm
Instant Torque Low/Soft Mode 14.4V : 40Nm / 18V : 50Nm
Speed at No Load High/Hard Mode 14.4V : 70-1350rpm / 18V : 70-1580rpm
Low/Soft Mode 14.4V : 30-400rpm / 18V : 30-470rpm
Blows Rate per Minute High/Hard Mode 14.4V : 1260-24300bpm / 18V : 1260-28400bpm
Low/Soft Mode 14.4V : 540-7200bpm / 18V : 540-8500bpm
Clutch Torque 1.0-4.4Nm
Max.Drill Diameter Low/Soft Mode In Wood - 14.4V : dia.35mm / 18V : dia.38mm
Low/Soft Mode In Metal - 14.4V : dia.13mm / 18V : dia.13mm
Max.Screws Driving Low/Soft Mode In Wood screw - 14.4V : dia.6.8mm / 18V : dia.8mm
Low/Soft Mode In Self-drilling screw - 14.4V : dia.6mm / 18V : dia.6mm
Size (LxHxW) / Weight (including battery pack) LJ2G 188mm x 250mm x 68mm / 2.10kg
PN2G 188mm x 234mm x 68mm / 1.85kg
LS2F 188mm x 242mm x 68mm / 1.95kg
Battery Pack and Charging time (using EY0L82B) LJ2G 18V / 5.0Ah (EY9L54B)
Usable:65min. / Full:80min.
PN2G 18V / 3.0Ah (EY9L53B)
Usable:45min. / Full:60min.
LS2F 14.4V / 4.2Ah (EY9L45B)
Usable:50min. / Full:60min.
Capacity LJ2G Screwing Wood Screws in Yellow pine – High Mode dia.4.1mm x 25mm 1750pcs
Wood Screws in Yellow pine – Low Mode dia.8mm x 80mm 430pcs
Self-Driling Screws in SPC – High Mode dia.4mm x 13mm, t=1.6mm 1250pcs
Drilling Holes in Plaster Board + Plywood (Wooding core) – High Mode dia.50mm, t=24.5mm (Plaster Board t=12.5mm, Plywood t=12.0mm) 60pcs
Holes in SPC (Hole Saw) – High Mode dia.21mm, t=1.6mm 50pcs
Holes in SPC (Hole Saw) – Low Mode dia.33mm, t=1.6mm 75pcs
Holes in Yellow Pine – High Mode dia.18mm x 120mm 140pcs
Holes in Yellow Pine – Low Mode dia.30mm x 40mm 280pcs
Holes in Mortar – High Mode dia.6.5mm x 30mm 220pcs
Holes in Mortar – High Mode dia.10mm x 30mm 160pcs
Holes in Masonry – High Mode dia.5mm x 40mm depth 260pcs
PN2G Screwing Wood Screws in Yellow pine – High Mode dia.4.1mm x 25mm 1050pcs
Wood Screws in Yellow pine – Low Mode dia.8mm x 80mm 260pcs
Self-Driling Screws in SPC – High Mode dia.4mm x 13mm, t=1.6mm 740pcs
Drilling Holes in Plaster Board + Plywood (Wooding core) – High Mode dia.50mm, t=24.5mm (Plaster Board t=12.5mm, Plywood t=12.0mm) 35pcs
Holes in SPC (Hole Saw) – High Mode dia.21mm, t=1.6mm 30pcs
Holes in SPC (Hole Saw) – Low Mode dia.33mm, t=1.6mm 45pcs
Holes in Yellow Pine – High Mode dia.18mm x 120mm 80pcs
Holes in Yellow Pine – Low Mode dia.30mm x 40mm 170pcs
Holes in Mortar – High Mode dia.6.5mm x 30mm 130pcs
Holes in Mortar – High Mode dia.10mm x 30mm 100pcs
Holes in Masonry – High Mode dia.5mm x 40mm depth 150pcs
LS2F Screwing Wood Screws in Yellow pine – High Mode dia.4.1mm x 25mm 1600pcs
Wood Screws in Yellow pine – Low Mode dia.8mm x 80mm 300pcs
Self-Driling Screws in SPC – High Mode dia.4mm x 13mm, t=1.6mm 830pcs
Drilling Holes in Plaster Board + Plywood (Wooding core) – High Mode dia.50mm, t=24.5mm (Plaster Board t=12.5mm, Plywood t=12.0mm) -
Holes in SPC (Hole Saw) – High Mode dia.21mm, t=1.6mm 35pcs
Holes in SPC (Hole Saw) – Low Mode dia.33mm, t=1.6mm 50pcs
Holes in Yellow Pine – High Mode dia.18mm x 120mm 110pcs
Holes in Yellow Pine – Low Mode dia.30mm x 40mm 180pcs
Holes in Mortar – High Mode dia.6.5mm x 30mm 130pcs
Holes in Mortar – High Mode dia.10mm x 30mm 110pcs
Holes in Masonry – High Mode dia.5mm x 40mm depth 200pcs
More Information
Product NamePanasonic 14.4V/18V Cordless Hammer Drill & Driver (EY79A2X57)
SKUEY79A2X57
barcode_gtin8887549611766
ManufacturerPanasonic
Flat Rate Shipping$30.00
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
© Copyright 2021 The Real Deal Group. All Rights Reserved